Follow the prompts on screen until you’re presented to create your root password. This process should take several minutes.ĭuring this process you will be prompted to reboot several times. Press Enter on the ESXi-5.5.0 Installer and let it load. If you haven’t found it yet, you can download ESXi version 5.5 here.Īlright now that we have all the pre-requisites out of the way boot to USB and you’ll be presented with 2 options. Once we have our flash drive, we’ll use it to create a bootable ISO of ESXi 5.5. You can buy USB sticks on Amazon for super cheap these days but most of us already have one laying around. Now that we have the hardware out of the way, we’re going to need the install media and probably a USB stick to boot to media. If you would like to know a little more on the hardware specs, check out VMWare’s site here. ESXi 5.5 requires the NX/XD bit to be enabled for the CPU in the BIOS.ESXi 5.5 must have at least 1 or more Gigabit or 10Gigabit Ethernet adapters.ESXI 5.5 only supports a host machine with a minimum of two cores.ESXI 5.5 requires that you have at least 4GB of RAM.First and foremost, let’s talk about hardware. In this article I’m going to give you a step by step guide on how to Install and Configure ESXi 5.5.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |